400W Metal Halide LED Retrofit Kit
Chiuer high lumen output 150W LED retrofit kits are e39 bulb for 400w-600w metal halide LED replacement for parking lot light
It is also a good LED conversion bulb kit of 400W-600W high pressure sodium (HPS), mercury vapor lamp for
- MH HPS flood light
- MH HPS wall pack light,
- MH HPS shoebox pole light fixtures,
- HPS corbra head street light fixture.
150W LED = 400-600 Watt HID ( MH, HPS, MV)
If you want to keep the old HID fixtures and convert 400-600 watt metal halide bulb to LED,
150w LED retrofit kit is the best E39 LED retrofit bulb
- Roadway lighting LED retrofit ;
- Street lighting LED retrofit ;
- Outdoor wall pack retrofit ;
- Parking garage lighting retrofit ;
- Pole light LED retrofit ;
- LED retrofit kits for car dealership parking lot light fixtures ;
|Item||LED Retrofit Kit|
|Working voltage||100-277V AC 50/60HZ|
|CCT||5000K (daylight white)|
|Beam angle||120 degree|
|HID Replacement||400W-600W MH HPS equal|
|Chip brand||Philips Lumileds SMD 3030 LEDs|
|Driver brand||MeanWell driver|
|Fan brand||Sunon fan|
|IP grade||IP65 waterproof|
|Mounting||E39 mogul base screw, U bracket can adjust kit’s dimension in order to fit fixture size well.|
|Shell finish color||Silver|
|Working temperature||-4℉ – 113℉|
|Safety Certificate||UL cUL|
|Energy Saving certificate||DLC(eligible for rebate)|
If your fixture socket base is E26 base, you need medium base adapter (E26 to E39) for 150w LED retrofit kits installation, here is the E26 to E39 base converter.
Product spec sheet
- Instant on, no flickering
- No UV and IR radiation
- Super bright, more than 80% energy efficiency
- Mercury free, environment friendly
- Easy retrofit of existing fixtures
- UL DLC listed, 5 years warranty.
- Long lifespan, less lumen decay
Frequently Asked Questions
Q1: I want to replace 400W metal halide bulb for parking lot lights, which one is better, 120W & 150W ?
120W LED retrofit kit can be replace 325W-400W MH HPS, while 150W is good to retrofit 400w-600w MH HPS.
If you want brighter or light pole is over 25ft high, it is better to take 150W, otherwise it is enough to use 120W and it is cheaper.
Q2: I notice there is Edison medium base there, does that socket base has current to run through like the metal halide, HPS bulbs ?
No, after removing the ballast and rewiring(cable connected to the socket needs to be cut off), the socket base just function as a fixed lamp holder for LED retrofit kits, no electric current runs through it.
All you need to do is to connect the driver wire end correctly to the power line “L” hot and “N” neutral end based on our installation manual.
Q3: My old HID fixture dimension is shorter in length than your 150w LED retrofit kit if keeping the screw socket, can I just remove the old socket and old reflector inside and use a metal plate and drill a hole and mount it on back ?
Yes, we offer such mounting plate as well in China factory, if you have the same installation problem for your shoebox lights, wall packs, canopy lights, streetlights, please contact us to order .
Q4: I cannot find DLC listing for this 150w LED retro fit kit, it is DLC listed as advertised ? because I need that to get approval from the power company in order to get incentives.
Yes, our 150 watt LED retrofit kits are DLC listed 100%, contact us for DLC listing shot, you surely can get rebate from power company.
Q5: What other wattage option do you offer for this LED retrofit kit ? do you offer 200-480 volt version ?
We offer 45W 60W 80W 100W 120W 150W 200W 300W 400W 450W for this retrofits series, and 200v-480v version can be provided for all watts.
Now only 80W 100W 120W 150W 200W 300W in stock in USA inventory.
- 1. Before LED retro fit kits installation, we need to remove the existing ballast in the old HID fixture.
- 2. Make sure the power is turned off, then we can have this conversion kit screw firmly into the socket with the Mogul base(E39).
- 3. U shaped bracket(see picture 2 in gallary) can be adjustable to fit different HID fixture’s dimension.
Note: Pls operate this 150W LED retrofit kits under the voltage range 90-277V, if you have shoebox light retrofit kits working over 200V-480V, Mean Well driver will burn out.
Special 400 watt MH LED Retrofit Kits
Should you want to buy 400W metal halide LED retrofit kit in
- 3000K/4000K/6000K LED retrofit kit ;
- 347V 480V LED retrofit kit ;
- U bracket LED retrofit kits ;
Pls feel free to send us message on Request A Quote page, we can make for you, just need some lead time from China factory.
Lead time: 3-5 business days for sample order , 5-10 business days for bulk order.